| 1986 |
 |
Commenced business as Rajoo Engineers Pvt. Ltd. at Manavadar, a small village in Junagadh district to manufacture cutting-sealing machines. |
| 1988 |
 |
Ventured into the manufacture of blown film lines and delivered first PPTQ blown film line. |
| 1990 |
 |
Made an entry into the International market with maiden export of a blown film line to Tanzania. |
| 1990 |
 |
Launched the first ever blown film line to manufacture chemically foamed PE films and displayed the line at Plastindia 1990. |
| 1991 |
 |
Introduced the first Indian co-extrusion feed block for multilayer sheet line and today command the largest market share of sheet extrusion lines in India. |
| 1994 |
 |
Begun operations at Rajkot. Entered into a technical collaboration with a British company. Went public and the issue was over-subscribed by nearly 24 times. |
| 1994 |
 |
Introduced the first ever indigenously designed and developed Oscillating Haul-off System for blown film lines and displayed at Plastindia 1994. |
| 1995 |
 |
Introduced the first indigenously designed extruder incorporating grooved feed bush, barrier screw and cross-hole mixing section. |
| 1995 |
 |
Introduced the first indigenously designed wide width blown film line for a lay-flat width of 3000 mm. |
| 1996 |
 |
Exported country’s first “CE” marked machine to the most demanding European market and since regularly exporting to Europe. |
| 1997 |
 |
Introduced an Internal Bubble Cooling System for blown film lines and displayed at Plastindia 1997. |
| 1999 |
 |
Secured ISO 9001 certification and further improved the Quality Management Systems. The Company has now graduated to ISO 9001:2000. |
| 2000 |
 |
Introduced stack type Universal Co-Extrusion Die christened UCD® in Asia. The die was displayed on a five layer co-extrusion blown film line at Plastindia 2000. |
| 2000 |
 |
Launched the first ever sheet line for PET at Plastindia 2000, which received overwhelming response from India and abroad. |
| 2001 |
 |
Introduced world’s highest output TQPP downward extrusion blown film line at Plastivision 2002, christened Aquaflex. |
| 2002 |
 |
Introduced India's first Electro-hydro-pneumatic plug-assist thermoformer with in-mould cutting for Polypropylene & PS containers. |
| 2003 |
 |
Introduced world’s first two layer TQPP downward extrusion blown film line displayed at Plastindia 2003. The line is an alternative to produce lower end BOPP films for lamination. This line was also displayed at K-2004. |
| 2003 |
 |
Awarded Export Excellence Certificate from Engineering Export Promotion Council of India in recognition of highest exports during the year. |
| 2004 |
 |
Received Gujarat Gaurav Award for its outstanding contributions to the plastic industry. |
| 2004 |
 |
Became a Star Export House recognized by Government of India for excellent exports. |
| 2004 |
 |
Developed and supplied first sheet line for physically foamed PE sheets using carbon dioxide as blowing agent. |
| 2004 |
 |
Developed a CE compliant high output sheet line for processing PET regrind at the rate of 700 kg/hr and exported the same to Germany. |
| 2005 |
 |
Developed Asia's first seven layer blown film die and exported to Colombia. |
| 2005 |
 |
Developed Asia's first resin sack blown film line and exported to Iran. |
| 2006 |
 |
Developed Asia’s first seven layer blown film line incorporating conical spiral stack (INCOSS)® die and displayed at Plastindia 2006. |
| 2006 |
 |
Developed Asia’s first three layer blown film line incorporating fully automatic touch screen control and 2100 mm roll width oscillating haul-off and fully automatic center-surface-gap winder exported to Gulf. |
| 2006 |
 |
Developed Asia’s first three layer wide width blown film line incorporating die dia 1200 mm and 4000 mm LFW. The maximum output is 1000 kg/hr. |
